Door-Handle Bezel (Cap) T2H2882LML

Return your Jaguar’s sleek side profile with the factory door-handle cap (part T2H2882LML). Supplied in primer, this genuine bezel clicks onto the outer handle shell, covering the key-slot/lock mechanism and providing a paint-ready surface that blends seamlessly with your body colour.

Key Benefits

• Perfect OEM geometry – locator tangs and snap-clips line up exactly with the original handle carrier; installs in under five minutes, no tools or adhesive.

• Primered ABS polymer – lightweight, impact-resistant plastic arrives in high-build primer for quick colour matching.

• Weather-sealed fit – tight tolerances keep rainwater, road salt and grit away from the lock barrel, extending mechanism life.

• Factory styling match – restores the clean, chrome-free look of non-passive-entry handles or accepts the OE sensor pad where fitted.

• Warranty-backed – covered by Jaguar’s 24-month genuine-parts guarantee for total peace of mind.

Vehicle Compatibility

Technical Specifications

1. Open the door and remove the single Torx T20 screw on the inner handle edge.

2. Slide the old bezel rearward; lift away from the handle.

3. Paint the new cap to match body colour; allow clear-coat to cure fully.

4. Hook the front tongue into the handle slot, then press the rear until clips click.

5. Re-install the screw (torque ≈ 1 Nm) and check gap alignment.