Selenia DigiteK Pure Energy 0W-30 (1 L)

Keep your modern Fiat, Alfa Romeo or Lancia engine running at peak performance with Selenia DigiteK Pure Energy 0W-30. This top-tier, fully synthetic motor oil is engineered to deliver rapid lubrication on start-up, superior wear protection under load and exceptional cleanliness for long service intervals.

Key Benefits

• Enhanced Cold-Start Flow
  SAE 0W-30 viscosity ensures immediate oil circulation at frigid temperatures, reducing start-up wear and protecting vital components.

• Fuel Economy Support
  Low-friction base oils and friction-modifier additives lower parasitic losses, helping to improve overall fuel efficiency.

• Superior Wear Protection
  Robust film strength guards bearings, cams and pistons under high temperatures and heavy loads, extending engine life.

• Engine Cleanliness
  Active detergent and dispersant system breaks down sludge and deposits, keeping oil passages, pistons and rings clean for consistent performance.

• Emissions System Compatibility
  Formulated to protect catalytic converters and particulate filters from poisoning and clogging, ensuring compliance with modern emission standards.

Technical Specifications

• Viscosity Grade: SAE 0W-30

• Density @ 15 °C: ~0.845 g/cm³

• Kinematic Viscosity @ 100 °C: ~9.0 cSt

• Pour Point: –45 °C

• Flash Point (COC): 220 °C

• Approvals & Specifications:

  • ACEA C2/C3

  • Fiat 9.55535-G1/G2

  • API SN/CF

Recommended Usage

1. Warm Up Engine: Run until normal operating temperature is reached.

2. Drain & Replace: Remove old oil and install a new OEM-spec oil filter.

3. Refill: Pour Selenia DigiteK Pure Energy 0W-30 to the manufacturer’s specified level.

4. Check Level: After a brief run, allow oil to settle and top up if necessary.

5. Service Interval: Change every 15,000 km or 12 months, or per vehicle manual.