Mopar MaxPro 5W-20 Fully Synthetic Engine Oil (1 L)

Keep your Fiat-Chrysler engine running at peak performance with Mopar MaxPro 5W-20, a premium fully synthetic motor oil engineered specifically for modern Chrysler Group powerplants. Its specially balanced viscosity ensures rapid lubrication on start-up, robust wear protection under load and helps improve fuel efficiency.

Key Benefits

• Superior Cold-Start Flow
  SAE 5W-20 rating provides instant oil circulation in low temperatures, reducing wear during start-up.

• Wear Protection
  Advanced additive package forms a strong lubricating film that shields bearings, camshafts and pistons under high stress.

• Fuel-Efficiency Support
  Low-viscosity base oils and friction modifiers reduce internal engine drag, contributing to improved mileage.

• Engine Cleanliness
  Powerful detergents and dispersants prevent sludge and deposit buildup, keeping oil galleries and piston crowns clean.

• Emission-System Compatibility
  Formulated to protect exhaust after-treatment devices—maintains catalytic-converter and particulate-filter health.

Technical Specifications

• Viscosity Grade: SAE 5W-20

• Approvals & Specs:

  • Chrysler MS-6395

  • ACEA A1/B1

  • API SN/CF

• Density @ 15 °C: ~0.842 g/cm³

• Viscosity @ 100 °C: ~8.6 cSt

• Pour Point: −42 °C

• Flash Point (COC): 220 °C

Recommended Usage

1. Warm Up Engine: Run until normal operating temperature is reached.

2. Drain & Replace: Change the oil filter, then drain the old oil.

3. Refill: Pour Mopar MaxPro 5W-20 to the manufacturer’s recommended level.

4. Check Level: After a short run, allow oil to settle and top up if necessary.

5. Service Interval: Change every 10 000 km or 12 months, or follow the vehicle’s maintenance schedule.