Liqui Moly Top Tec 4200 5W-30 (5 L)

Optimize your engine’s performance, longevity and emissions control with Liqui Moly Top Tec 4200 5W-30. This state-of-the-art fully synthetic oil meets the highest OEM standards for vehicles equipped with diesel particulate filters (DPF) and gasoline particulate filters (GPF), ensuring top-tier protection under all driving conditions.

Key Benefits

• DPF & GPF Compatibility
  Formulated without low-scatter ash additives to protect particulate filters from clogging and extend service intervals.

• Rapid Cold-Start Protection
  SAE 0W-30 viscosity ensures immediate oil flow at sub-zero temperatures, safeguarding bearings and camshafts from start-up wear.

• Enhanced Oxidation Stability
  Premium ester and PAO base stocks resist thermal breakdown, minimizing sludge and deposit formation for a clean engine.

• Fuel Economy Boost
  Low-viscosity design and advanced friction modifiers reduce internal drag, contributing to measurable improvements in fuel consumption.

• Extended Service Life
  Robust additive package maintains performance over longer drain intervals, reducing maintenance frequency and total cost of ownership.

Technical Specifications

• Part Number: 5W30LIQ4200

• Volume: 5 liters

• Viscosity Grade: SAE 0W-30

• Approvals & Standards:

  • MB-Approval 229.51

  • VW 504.00 / 507.00

  • Porsche A40

  • ACEA C3

• Density @ 15 °C: ~0.848 g/cm³

• Viscosity @ 100 °C: ~9.0 cSt

• Pour Point: –48 °C

• Flash Point (COC): 220 °C

Recommended Usage

1. Warm Up Engine: Run to normal operating temperature for accurate level reading.

2. Drain & Replace: Remove the old oil and filter per manufacturer instructions.

3. Refill: Pour in Top Tec 4200 until the dipstick indicates the correct level.

4. Check Level: After a short idle and cooldown, verify and top off if necessary.

5. Service Interval: Up to 30 000 km or 2 years under long-life service intervals (consult your vehicle’s manual).