Oil Filter K68492616AA

Protect your engine from wear-inducing contaminants with the genuine FCA-CJD oil filter (part K68492616AA). Engineered to factory specifications, this spin-on filter delivers high-efficiency filtration, reliable sealing and easy service for peak engine performance.

Key Benefits

• Exact OEM Fit
  Threads, gasket diameter and canister dimensions match the original equipment for a perfect drop-in replacement—no adapters required.

• Multi-Layer Synthetic Media
  Advanced filter element captures particles down to 20 microns while maintaining optimal oil flow, reducing wear on bearings, camshafts and pistons.

• Anti-Drain Back Valve
  Integrated silicone valve prevents oil from draining out when the engine is off, ensuring immediate lubrication at startup and minimizing dry-start wear.

• Robust Steel Housing
  Heavy-gauge steel resists high oil pressures and temperature extremes without distortion; powder-coated finish protects against corrosion.

• Easy Maintenance
  Standard spin-on design allows quick removal and installation with common filter wrenches; clean sealing surface ensures leak-free performance.

Technical Specifications

• Part Number: K68492616AA

• Filter Type: Spin-on canister

• Media: Multi-layer synthetic fiber

• Bypass Valve: 0.8 bar spring-loaded

• Anti-Drain Back Valve: Silicone, temperature-rated to +150 °C

• Seal Material: NBR rubber gasket

• Operating Temperature: –30 °C … +150 °C

• Compatibility: Select FCA-CJD gasoline and diesel engines requiring this filter

• Service Interval: Replace every 10 000–15 000 km or per manufacturer recommendation

Installation Overview

1. Warm Up Engine: Run briefly to warm oil, then shut off and allow oil to drain.

2. Remove Old Filter: Use a filter wrench to unthread the old filter; catch residual oil.

3. Prep New Filter: Lightly coat the new filter’s gasket with fresh engine oil.

4. Install New Filter: Hand-thread until gasket contacts the base, then tighten an additional ¾ turn.

5. Check for Leaks: Start the engine, inspect around the filter, and verify proper oil pressure.

6. Dispose Responsibly: Recycle the used filter and oil in accordance with local regulations.